MD100E is an Ultra-Portable ECG Unit with a 2.8" color TFT screen for improved ease of visibility. It is ideal for EMS/Rescue, physician, home care and patient use. 1-lead 30 second ECG Strips and results may be displayed, stored on a Micro-SD Card and transferred to a PC for archiving and printing. Includes software to transmit to PC, USB Cable and 3-lead ECG cable.
MD100E's 0.5 to 75 hertz frequency response provides optimal signal quality. Grid marks are provided at 5mm spacing. The unit can be configured to store 30 seconds strips or be put in a continuous mode for extended monitoring.
Patient may hold the unit's electrodes between both hands (Lead I), use the right hand to hold the unit against the left leg (Lead II) or use the right hand to hold the unit against the chest (chest lead). However, do note that if the patient has dry skin, there will be high impedance and you may get poor signal quality. Applying water or gel to the skin may improve impedance and ECG signal quality.
For better signal quality, you can use the optional limb clips or snap-ecg electrode cable. The limb clips can clip against the patients wrists and leg and applies gentle pressure to reduce artifact and noise. The limb clips are especially useful on geriatric patients which may have thin skin which would be easily damaged with electrode use. For the best signal quality and least noise on the ECG waveform, use the 3-lead cable and apply electrodes.
Always relax when taking measurements, as muscle action may cause noise to appear on the ECG signal.
The unit will automatically power off if no key is pressed within 1 to 10 minutes (user configurable).Features
FDA 510(K)# K080933
Measurement: ECG and heart rate
Leads: I, II, and III
Micro-SD Card supported
Detailed EKG analysis report
ECG arrhythmia analysis
Convenient cable-free operation
PC software for data management and analysis
ECG cable and electrodes (optional)
Measurement in 30 seconds
Memory for a maximum of 30-second ECG measurements
Continuous measurement supported
Backlit LCD display
Auto power-off in 60 seconds
Low battery indicator
Two AAA batteries included
Each set of batteries can last up to 500 measurements.Software Screenshot
Software is provided for saving the data into computer files and for performing analysis. The following screen shot shows the record management function.Sample of ECG Captured Technical Specifications
Display screen: 60 x 45mm unicolor LCD
One measurement channel
Signal bandwidth: 0.5 - 75Hz
Sampling rate: 250Hz
Heart rate: 30-100bpm ±2bpm; 101-240bpm ±4bpm or 2%
Dimension: 140 x 75 x 26mm
Weight: 125g (not including two AAA batteries)
Windows supported: XP, Vista, and 7